In my option this is the best DCC system you could have. Value for money is second to none.
What this system can’t do is not worth having. It’s the complete package.
Check out the spec’s.
We supply a Australian Plug for you.
General product information
The Digikeijs DR5000 is a universal DCC command station with almost all currently available bus connections.
Currently we are running trains via wireless connection to the DR5000.
We are using Decoder Pro and the engine driver apt for android. I do like the Engine Driver Apt.
The central unit can be operated with all LocoNet® and XpressNet devices and via WLAN with mobile hand controllers. The DR5000 can be connected to a PC via LAN, Wi-Fi or USB. The LocoNet®, Z21®, DR Command® or XpressNet® protocol can be selected for communication with the PC.
This allows the DR5000 to communicate with any supporting software such as iTrain®, Koploper® Windigipet® Train Controller® and RocRail®. Peripherals such as Roco® Multimaus®, Roco® Wlan Multimaus®, Lenz LH01®, Daisy II® (wired or wireless in connection with the radio master) and other LocoNet® or XpressNet® compatible devices can be connected and used simultaneously.
Australian power plug included.
The maximum output current of the DR5000 is 3 A. If more power is required, use a booster with an H-bridge output, such as the DR5033. Older boosters with a common ground connection (e.g., Märklin®, Uhlenbrock®) are not suitable and will cause short circuits and/or damage to the DR5000.
Built in Throttle Built in Switch Panel
DR 5000 ADJ DCC Multi – Bus Command Station
Available protocols :- DCC
Speed steps :- 14/28/128
Locomotive :- Maximum 117 loco addresses can be controlled simultaneously
Decoder address :- 9999, Long Address short addresses adjustable to max. 126
Magnet article address :- 2048 DCC Magnet article addresses
Track current :- 3 Ampère
Track exit :- H-Bridge
Available connections and protocols
LocoNet B Booster connections (max. 40 boosters and max. 128 modules with 16 Inputs RailCom)
LocoNet T Max. 128 modules with 16 inputs. RailCom and LocoNet together provide maximum 600mA supply current XpressNet (Max. 30 Multimice / 600mA.
B-Bus Maximum 4 boosters can be connected
R-Bus Maximum 10 modules with 16 inputs
Ext88N Maximum 16 modules with 16 inputs. The bus connection is S88N compatible
RS-Bus Maximum 32 modules with 16 inputs
Programming Track Connection (simultaneous driving and programming possible)
Voltage input Minimum 14 VDC and max. 22 VDC. Recommended input voltage max 19 VDC
USB USB -B 2.0
Protocols LocoNet, XpressNet -USB 3.6, LocoNet Binary, Dr Command and Z21
Lan 100 Mbit Full-duplex ( XpressNet -Lan 3.6, Lan 3.6, LocoNet LBServer, LocoNet Binary , Z21
Wi-Fi Lenz-LAN3.6 and LocoNet LB Server, ROCO wireless multi mouse.
Infrared receiver Compatible with Uhlenbrook and Piko.