General product information
The DIGISERVO decoder is a fully programmable servo decoder. Each
output also has an extra switching output to switch e.g., a light or
decoupling track. Also, each output can be calibrated with software,
which makes installing the servos easier as they can be set up after
being installed. The DI- GISERVO decoder is the first servo decoder
that works based on function mapping.
Possibilities
44 Servo outputs
4 extra switch outputs
Power and activity indicator
Mass simulation (for arm signals)
Servo calibration through the central unit
Extensive function mapping
Multiprotocol (DCC/MM)
Fully CS2 compatible
Separated current and signal input
Multiple presets
Technical Specifications
Size 89 x 87 x 22 mm
Power consumption (resting) 50 mA
Protocol DCC, Motorola
Outputs 4x Servo / 4x Switch
Maximum load 3 Ampère
Total outputs 4x Servo / 4x Switch